Shrink sleeve

Shrink sleeve with stainless steel rail

The BWAS shrink sleeves are rail-closed repair sleeves with an adhesive coating.

What are shrink sleeves used for?

They are excellently suited for sheathing and repairing damaged cables. Thanks to the high shrink ratio, a wide range of applications can be covered.

How are shrink sleeves used?

The BWAS shrink sleeve is placed around the damaged area and closed with a closure rail. The hot-melt adhesive applied on the inside seals the cable watertight.

The sleeves are available in lengths of 250 mm, 500 mm, 750 mm, 1,000 mm and 1,500 mm and can be shortened as required.

Type BWAS (Ø (D) min. before shrinking – Ø (d) max. after shrinking – PU lengths in metres):

• 34/10 – 34.00 mm – 10.00 mm – 0.5; 0.75; 1.0; 1.5
• 50/10 – 50.00 mm – 10.00 mm – 0.5; 0.75; 1.0; 1.5
• 75/15 – 75.00 mm – 15.00 mm – 0.5; 0.75; 1.0; 1.5
• 82/20 – 82.00 mm – 20.00 mm – 0.5; 0.75; 1.0; 1.5
• 105/30 – 105.00 mm – 30.00 mm – 0.5; 0.75; 1.0; 1.5
• 122/28 – 122.00 mm – 28.00 mm – 0.5; 0.75; 1.0; 1.5
• 137/34 – 137.00 mm – 34.00 mm – 0.5; 0.75; 1.0; 1.5
• 160/55 – 160.00 mm – 55.00 mm – 0.5; 0.75; 1.0; 1.5
• 200/55 – 200.00 mm – 55.00 mm – 0.5; 0.75; 1.0; 1.5
• 250/98 – 250.00 mm – 98.00 mm – 0.5; 0.75; 1.0; 1.5

BWAS shrink sleeves